Optimization of forensic identification through 3-dimensional imaging analysis of labial tooth surface using open-source software.

Purpose: The objective of this study was to determine the minimum number of teeth in the anterior dental arch that would yield accurate results for individual identification in forensic contexts. Materials and Methods: The study involved the analysis of 28 sets of 3-dimensional (3D) point cloud data, focused on the labial surface of the anterior teeth. These datasets were superimposed within each group in both genuine and imposter pairs. Group A incorporated data from the right to the left central incisor, group B from the right to the left lateral incisor, and group C from the right to the left canine. A comprehensive analysis was conducted, including the evaluation of root mean square error (RMSE) values and the distances resulting from the superimposition of dental arch segments. All analyses were conducted using CloudCompare version 2.12.4 (Telecom ParisTech and R&D, Kyiv, Ukraine). Results: The distances between genuine pairs in groups A, B, and C displayed an average range of 0.153 to 0.184 mm. In contrast, distances for imposter pairs ranged from 0.338 to 0.522 mm. RMSE values for genuine pairs showed an average range of 0.166 to 0.177, whereas those for imposter pairs ranged from 0.424 to 0.638. A statistically significant difference was observed between the distances of genuine and imposter pairs (P<0.05). Conclusion: The exceptional performance observed for the labial surfaces of anterior teeth underscores their potential as a dependable criterion for accurate 3D dental identification. This was achieved by assessing a minimum of 4 teeth.

Digitally planned surgical crown lengthening: a novel bone reduction strategy to correct a gummy smile.

This report describes the bone reduction guide which was digitally obtained to improve diagnosis, treatment outcome and follow-up. Treatment of gingival smiles due to altered passive eruption should include interdisciplinary planning and smile design to facilitate the prediction of treatment outcome. Crown lengthening surgery can be supported by digital tools to improve surgical planning and follow-up. A 30-year-old female patient was referred to a private dental clinic seeking solutions for her gingival smile. Based on the anatomical crown length, a smile design was created, and the patient was presented with a simulated smile before treatment. In the surgical phase, a full-thickness flap was raised in the upper jaw to achieve the desired outcome. Using cone-beam computed tomography to determine cementoenamel junction for smile design and treatment planning brings many benefits. Patients and clinicians can foresee treatment results. From there, appropriate changes can be made. The bone reduction guide is designed to rest on the bone to help the clinician cut the bone accurately and thoroughly follow the established plan.

Does the use of platelet-rich fibrin enhance the rate of orthodontic tooth movement? A systematic review and meta-analysis.

Introduction: This review synthesizes the available evidence pertinent to the effect of platelet-rich fibrin on the rate of orthodontic tooth movement during comprehensive orthodontic treatment. Method: This review followed the Preferred Reporting Items for Systematic Review and Meta-Analysis guidelines. Nine electronic databases were searched until January 2024 without restrictions, followed by a hand search of the reference lists. Controlled randomized split-mouth human studies assessing the effect of platelet-rich fibrin on the rate of orthodontic tooth movement were included. All relevant data from the included studies were extracted and pooled for qualitative and quantitative analysis. Risk-of-Bias was assessed using the Cochrane Risk of Bias tool. The certainty of the evidence was graded using the Grading of Recommendations, Assessment, Development, and Evaluation tool. Results: From 515 studies, eleven randomized clinical trials were included for qualitative analysis and nine for quantitative analysis. The certainty of the evidence for these studies was low to moderate. The overall risk of bias for most studies was of some concern. The pooled estimate of the data from ten studies has a mean revealed difference of 1.31 (0.13-2.48) at a 95 % confidence interval with significant heterogeneity. Conclusions: This systematic review suggest that platelet-rich fibrin enhances the orthodontic tooth movement rate, but the evidence quality was moderate. Further, based on the currently available evidence, the effectiveness of platelet-rich fibrin on the acceleration of orthodontic tooth movement could not be fully established. Trial registration: PROSPERO: (CRD42021261836).

The Analysis of Intermolar Width and Skeletal Base Class as a Predictor of Potential Maxillary Canine Impaction in Permanent Dentition: A Cross-Sectional Study.

Objectives. This study aimed to analyze the inter-molar width and skeletal base class to predict maxillary canine impaction in permanent dentition. Methods. This cross-sectional study was carried out between September 2021 to March 2022. Patients aged between 13 and 20 years were recruited. These patients' cone-beam computer tomography(CBCT), lateral cephalogram, and dental casts were collected and analyzed. For statistical analysis, T-test and Chi-square tests were applied. Results. A total of 92 patients were enrolled in this study. Inter-molar width was significantly decreased in patients with impacted canine(P < .001). The skeletal base classification was statistically significant when compare with intermolar width(P < .05). The location of impaction (P = .060), type of impaction(P = .435), and side of impaction(P = .239) were determined to be statistically insignificant. Conclusion. The Inter-molar width was decreased in patients with impacted canine; therefore, it may be a potential risk factor. The skeletal classification was found to affect inter-molar width in impacted canine patients.

Exploring the feasibility of smartphone cameras for 3D modelling of bite patterns in forensic dental identification.

The field of bitemark analysis involves examining physical alterations in a medium resulting from contact with teeth and other oral structures. Various techniques, such as 2D and 3D imaging, have been developed in recent decades to ensure precise analysis of bitemarks. This study assessed the precision of using a smartphone camera to generate 3D models of bitemark patterns. A 3D model of the bite mark pattern was created using 3Shape TRIOSTM and a smartphone camera combined with monoscopic photogrammetry. The mesiodistal dimensions of the anterior teeth were measured using Rapidform Explorer and OrtogOnBlender, and the collected data were analyzed using IBM® SPSS® Statistics version 23.0. The mean mesiodistal dimension of the anterior teeth, as measured on the 3D model from 3Shape TRIOSTM and smartphone cameras, was found to be 6.95 ± 0.7667 mm and 6.94 ± 0.7639 mm, respectively. Statistical analysis revealed no significant difference between the two measurement methods, p > 0.05. The outcomes derived from this study unequivocally illustrate that a smartphone camera possessing the specific parameters detailed in this study can create a 3D representation of bite patterns with an accuracy level on par with the outputs of a 3D intraoral camera. These findings underscore the promising trajectory of merging smartphone cameras and monoscopic photogrammetry techniques, positioning them as a budget-friendly avenue for 3D bitemark analysis. Notably, the monoscopic photogrammetry methodology assumes substantial significance within forensic odontology due to its capacity for precise 3D reconstructions and the preservation of critical measurement data.

Use of surgical grafting as a part of multidisciplinary treatment for a patient treated with fixed orthodontic therapy to improve treatment outcomes.

Key Clinical Abstract: Multidisciplinary treatment options can help provide good clinical outcomes if these are appropriately sequenced and carried out correctly. This case exemplifies interdisciplinary involvement to ensure the patient received an improved esthetic outcome. Abstract: The presence of anterior diastemas may compromise the esthetics of a patient's smile, causing mental, and social trauma in many patients. After careful evaluation Periodontal, surgical, and prosthodontic treatments are sometimes required to ensure successful treatment outcomes using a multidisciplinary staged treatment approach. These approaches must be carefully planned to ensure timely treatment progress. Surgical intervention must be planned at the right point in treatment to ensure adequate healing before placement of esthetic restorations.

Frequency and etiological denominators of alveolar osteitis at Northern Province of Kingdom of Saudi Arabia-An observational study.

Objective: Alveolar osteitis is a painful complication that often arises after tooth extraction, presenting a significant clinical challenge. It is imperative to gain a comprehensive understanding of both its occurrence and the contributing factors to enhance the quality of dental care. The aim of this study was to assess the frequency and prevalence of alveolar osteitis among patients and compare these variables based on demographic characteristics (age and sex), the number of teeth extractions, operator experience, health status, and smoking habits in the target population. Methods: This cross-sectional observational study was conducted from May 2019 to April 2020. It included all patients above 16 years of age, of both genders, who underwent permanent tooth extraction for various reasons. Patient demographics, smoking habits, health status, operating dental surgeon's clinical experience, extraction technique, and the number of teeth extracted were recorded. Statistical analysis was performed using SPSS version 25. Chi-square test and regression analysis were used to assess differences between age, sex, smoking habit, dentist category, and the number of teeth extractions in relation to alveolar osteitis. Results: A total of 679 permanent tooth extractions were performed in 438 patients. Alveolar osteitis was observed in 107 cases (15.7%) following tooth extractions. Among these, 36 cases (33.6%) occurred in single tooth extraction cases, while 71 cases (66.4%) were present in patients with multiple extractions. Moreover, 67 cases (62.6%) of alveolar osteitis were found in cigarette smokers. In addition, 61 cases (57%) of dry sockets were reported after tooth extractions performed by dental interns, while 46 cases (43.0%) were noted in extractions performed by experienced dental surgeons and specialists. Conclusion: The study found a 15.7% incidence of alveolar osteitis in tooth extraction patients in the Al-Jouf region. Alveolar osteitis was more prevalent in males and the age group of 56-77 years. Multiple tooth extractions were associated with higher alveolar osteitis incidence, while operator inexperience increased post-extraction complication risks. In addition, a promising novel protocol and risk assessment scoring system have been devised which require further validation and future research.

Finger prosthesis: A novel way to restore the form, function, and esthetics.

Key Clinical Message: A well-customized prosthesis with a life-like esthetic and function are the primary determining factors for its acceptance and success. RTV silicones can prove to be very effective and useful in fabricating such prosthesis. Abstract: Complete or partial finger amputations impact an individual's psychological and physical well-being and are considered the most frequently observed pattern of hand loss. A customized prosthesis offers the patient rehabilitative, functional, and psychological advantages. Retention is the key to the success of such prosthetic restoration. The present case report describes a novel technique that utilizes passive vacuum fit and mechanical retention to restore controlled function movements as a metal wire framework. The procedure was economical, most importantly, produced life-like anatomy of the missing digit and restored the function to some extent.

Measuring tooth size discrepancies using Bolton analysis: a comparative cross-sectional study among major ethnicity in Malaysia.

BACKGROUND: The Bolton analysis is one of the commonly used tooth size analysis or diagnostic tools in deriving a treatment plan for orthodontic patients. Many studies have indicated and concluded that normal measurements for one group should not be considered normal for other ethnic groups. The aims and objectives of this study were to investigate the applicability of Bolton's ratios in the orthodontic population of Malaysian main ethnics, Malay, Chinese, and Indians. Comparisons were made in terms of size and distribution of tooth size discrepancy in the Malaysian orthodontic population and the findings were converted in terms of millimeters. METHODS: Hundred fifty pre-orthodontic study casts comprised of 52 Malay, 54 Chinese, and 44 Indian patients were selected. Digital calipers (Fowler Pro-Max) linked to Hamilton Tooth Arch Software were used to measure the tooth width and ratios. Statistical analysis was carried out to test for gender differences (independent t-test), to identify the effects of malocclusion and ethnic groups (Two-way ANOVA), and to compare the means of the current study with Bolton's standards (one sample t-test). RESULTS: This study showed that there was no significant difference between the genders of the sample of each ethnicity. There was no correlation found between ethnic groups and malocclusion classes. There was a significant difference when comparing Bolton values with the Malay sample for both ratios. It was found that more Malay subjects presented with maxillary excess contrary to Chinese and Indians who presented more maxillary deficiency for the anterior and overall ratio. CONCLUSION: There was a significant difference found between the TSD of the three major ethnicities in Malaysia. The Bolton standards can be applied to Malaysian Chinese and Indians but not to Malays orthodontic populations for both anterior and overall ratios. Subsequently, a specific standard should be used for the Malays orthodontic population. It was found that more Malay subjects presented with maxillary excess contrary to Chinese and Indians who presented more maxillary deficiency for the anterior and overall ratio.

Separation effect, pain perception during functional activity and gingival inflammation of elastomeric and Kansal separators-a split mouth study.

INTRODUCTION: An effective space opening for band placement with minimal pain and gingival inflammation is a prime requisite during fixed orthodontic procedures. The study aimed to compare the effectiveness of two types of separators, elastomeric and Kansal, in the amount of space opening, pain perception elicited, and gingival inflammation. METHODS: A random split-mouth study was designed with 30 subjects undergoing fixed orthodontic treatment. Two different separators (Elastomer and Kansal) were placed alternatively on the left and right sides around the mesial and distal sides of the first molars in the mandibular arch of each subject. After 3 days, the amount of separation after 3 days was assessed with a leaf gauge on both mesial and distal sides. The subjective pain perception by visual analog Scale (VAS) at different points and during different functions for each of the 3 days was evaluated. A self-filled chart was utilized to be performed by the patients. Gingival index was used to assess the inflammatory changes. RESULTS: The most significant amount of separation (0.28 mm) was found with elastomers on the mesial side and is statistically significant (p < 0.001) compared to the mesial side (0.18 mm). The Kansal separators produced equivalent separation on mesial (0.19 mm) and distal sites (0.17 mm). The highest pain score was found after 24 h with elastomeric separators (median-40) for chewing and biting and the least for sleep (median-30). There is a statistical difference of pain perception between elastomers and Kansal separators at different points for the given function (p < 0.001). Both the separators resulted in mild gingival index of score less than 1 (0.70 ± 0.65, 0.97 ± 0.720, and there was no statistically significant difference between the two types of separators. CONCLUSION: Both the separators produced adequate separation after a minimum 3 days. Kansal produces minimum discomfort and pain compared to elastomeric separators. Mild gingival inflammation was observed with both the separators.

Current Trends in Fixed Prosthodontics Education in Undergraduate Dental Colleges.

OBJECTIVES: The objective of this study was to explore current trends in undergraduate fixed prosthodontics teaching at undergraduate dental level education. METHODS: This cross-sectional descriptive study included close-ended questions to inquire about the teaching practices of fixed prosthodontics at Bachelor of Dental Surgery level education. Electronic copies of the survey forms were sent to the heads or directors of department of prosthodontics responsible for undergraduate dental students teaching and learning in various institutes of Sindh by the help of Google forms in December 2020. The form included questions on sociodemographic details and questions inquiring the theoretical and clinical teaching practices in undergraduate fixed prosthodontics course. Data was entered and analyzed using SPSS 25. Frequency distribution and percentages of categorical variables were recorded. RESULTS: Out of total 18 dental institutes of Sindh, 15 returned the completely filled form, giving a response rate of 83.3%. Seven (46.7%) schools teach various fixed prosthesis in the preclinical years to their students. All 15 colleges carry out didactic teaching and provide exposure by live clinical demonstrations for various fixed prosthesis. Faculty of 12 (80%) dental colleges where fixed prostheses are being constructed in the dental outpatient department mentioned that their students observe or assist the clinical procedures during their clinical rotation; but none of the students fabricate any type of fixed prosthesis in the clinical setting during their undergraduate years. CONCLUSION: Didactic teaching and live clinical demonstrations of fixed prosthodontics is being carried out in all dental colleges of Sindh. Almost half of the dental schools teach crown preparation on phantom teeth during their preclinical course. Contrary to this, none of the students fabricate any type of fixed prosthesis in the clinical setting during their undergraduate years. As these procedures are not included in the current undergraduate curriculum, recommendations should be forwarded to governing educational body of the country to include cases of fixed prosthesis in their skill set prior to their graduation.

Growth differentiation factor-15 and circulating biomarkers as predictors of periodontal treatment effects in patients with periodontitis: a randomized-controlled clinical trial.

BACKGROUND: During the last decades, in patients with periodontitis, periodontal treatment has been shown to reduce the potential release of local and systemic biomarkers linked to an early risk of systemic inflammatory disorders. This study evaluated the efficacy of non-surgical-periodontal treatment (NSPT) on growth differentiation factor 15 (GDF-15) and related circulating biomarkers such as glutathione peroxidase 1 (GPx-1), c-reactive protein (hs-CRP), and surfactant protein D (SP-D) in periodontal patients and explored whether subjects who had high GDF-15 levels at baseline showed increased clinical benefits following NSPT at 6-months follow-up. METHODS: For this two-arm, parallel randomized clinical trial, patients with periodontitis were randomly allocated to receive quadrant scaling and root-planing (Q-SRP, n = 23, median age 51 years old) or full-mouth disinfection (FMD, n = 23, median age 50 years old) treatment. Clinical and periodontal parameters were recorded in all enrolled patients. The primary outcome was to analyse serum concentrations changes of GDF-15 and of GPx-1, hs-CRP, and SP-D at baseline and at 30, 90, and 180-days follow-up after NSPT through enzyme-linked immunosorbent assay (ELISA) and nephelometric assay techniques. RESULTS: In comparison with FMD, patients of the Q-SRP group showed a significant improvement in clinical periodontal parameters (p < 0.05) and a reduction in the mean levels of GDF-15 (p = 0.005), hs-CRP (p < 0.001), and SP-D (p = 0.042) and an increase of GPx-1 (p = 0.025) concentrations after 6 months of treatment. At 6 months of treatment, there was a significant association between several periodontal parameters and the mean concentrations of GDF-15, GPx-1, hs-CRP, and SP-D (p < 0.05 for all parameters). Finally, the ANOVA analysis revealed that, at 6 months after treatment, the Q-SRP treatment significantly impacted the reduction of GDF-15 (p = 0.015), SP-D (p = 0.026) and the upregulation of GPx-1 (p = 0.045). CONCLUSION: The results evidenced that, after 6 months of treatment, both NSPT protocols improved the periodontal parameters and analyzed biomarkers, but Q-SRP was more efficacious than the FMD approach. Moreover, patients who presented high baseline GDF-15 and SP-D levels benefited more from NSPT at 6-month follow-up. TRIAL REGISTRATION: NCT05720481.

Complications associated with the surgical removal of non-syndromic supernumerary premolar tooth buds in the mandible.

Hyperdontia involving the premolar teeth can be single or multiple or even related to a syndrome. These are frequently encountered in permanent dentition, but their occurrence has ranged between 0.09 and 0.64% in the general population. These are commonly found between the permanent canines and first premolars but rarely between the first and second premolars. These are usually eumorphic and can be easily identified as they follow the conventional tooth morphology. These are usually asymptomatic and not easily palpable unless they are very close to eruption. A lingual approach is preferred during their removal over the buccal method as it poses less risk of root trauma. In this case, bilateral accessory premolar tooth buds were present between the first and second premolars. Since the patient was undergoing orthodontic treatment, she was advised to remove these accessory teeth. For their removal, a Neumann flap with a buccal approach was used, which led to fracturing the root apex of the mandibular right second premolar root. On follow-up over the next 1 year, no other complications or secondary tooth germs were observed, and following a period of bone formation, the bone in the affected area formed normally again.

Interdisciplinary orthodontics-implants management of a challenging hypodontia case complicated by a class II division 2, bimaxillary retroclination.

INTRODUCTION: The case in this study had moderate hypodontia, with both lower lateral incisors and the lower-left second premolar missing. A Class II division 2 relationship with severe crowding in the upper arch and a traumatic deep bite over a skeletal I base complicated the occlusion. MATERIALS AND METHODS: The plan was to extract the upper first premolars to relieve upper arch crowding and the lower-left impacted second premolar to preserve the bilateral class I molar relationship. A class I occlusal relationship was achieved through space opening in the lower lateral incisors region and space closure in the upper and lower premolars regions. RESULTS: The use of orthodontic screws for bite opening and anterior segment retraction, in conjunction with bi-metric slot size selection in bracket prescription, was effective in controlling incisor inclination and interincisal angle. The use of an implant fixture before beginning the finishing stage allowed for a reduction in total treatment time and facilitated the provision of the final prosthesis before debonding the case. As a result, the patient was able to receive a satisfactory occlusion on the day of debonding. CONCLUSION: This case of moderate hypodontia was successfully resolved by combining space closure and space opening effectively. To solve the arch problems in such Class II division 2 cases with severe crowding, extractions were required. To complete the case, this was combined with intrusive and retractive mechanics. In hypodontia cases, implants are an excellent choice for both aesthetics and functional restoration.

Variation in location of the distobuccal root canal in a permanent maxillary second molar: A case report.

Key Clinical Message: Clinicians should be aware of the variations in the number of roots and root canals and the peculiar or eccentric location of root canals. An intraoperative CBCT can be very useful in improved visualization of the anatomical variations. Abstract: This case report describes the unusual location of the distobuccal root canal in a maxillary second molar with root fusion. On access opening, three distinct root canal orifices, the mesiobuccal canal, palatal canal, and a third orifice closer to the palatal canal, were seen, giving an illusion of an additional palatal canal. An attempt was made to search for the distobuccal canal in its usual position, leading to the gouging of the pulp chamber floor. An intraoperative limited field of view cone-beam computed tomography (CBCT) revealed the root orifice adjacent to the palatal canal was the distobuccal canal. CBCT also revealed fusion of both the buccal and palatal roots in the root's coronal and middle third region, but they were not fused apically.

Avulsion of Permanent Mandibular Incisors: A Report of Two Cases with Pertinent Literature.

Introduction. This study reports two rare cases of avulsion of permanent mandibular incisors with their sequelae after being reimplanted by two contrary methods. The relevant literature regarding the avulsion of permanent mandibular incisors is also being discussed. Case Presentation. In Case I, a 9-year-old girl reported an avulsion of the permanent mandibular left lateral incisor that was immediately reimplanted within 20 minutes after injury, whereas in Case II, all four permanent mandibular incisors were avulsed and reimplanted after a prolonged extraoral dry time of 36 hours in an 18-year-old female. Both cases missed their scheduled follow-up visits and were reported after 3.5 years and 7 months, respectively, with severe root and alveolar bone resorption that was confirmed by clinical examination and Intra oral periapical radiograph (IOPA) radiographs. Discussion. Avulsion of permanent mandibular incisors is rare. The similar unfavorable outcome of contrary cases at a variable duration of time after missed follow-up illustrates the role of the appropriate treatment protocol and regular follow-up visits for the long-term success of reimplanted teeth.

Single visit rehabilitation of 12-day neonate with cleft palate using modified feeding spoon impression technique: A case report.

The rehabilitation of the cleft requires a multidisciplinary approach involving a pediatrician, surgeon, otolaryngologist, speech therapist, orthodontist, prosthodontist, and psychologist. The present case report illustrates the rehabilitation of a 12-day-old neonate with a cleft palate. Since the palatal arch of the neonate was very small, a feeding spoon was innovatively modified to obtain the impression. The obturator was fabricated on the same day and delivered in one appointment.

Dental Luting Cements: An Updated Comprehensive Review.

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration.

Adjunctive controlled intrusion of the maxillary first molar using orthodontic miniscrews.

In the absence of the mandibular first molar, there is corresponding supra-eruption of the maxillary first molar, which can lead to occlusal interferences compromising the space available for restoration with a prosthesis. In this case report, the maxillary left first molar intrusion has been discussed with the use of two miniscrews. A 28-year-old female reported with a missing mandibular left first molar and wanting to replace it with a dental implant. The patient presented with a Class I skeletal relation, mild proclination of the anteriors and occlusal contacts. The maxillary first molar had erupted by >4 mm beyond the occlusal plane, thereby reducing the space available for placement of a lower prosthetic crown. After 5 months of intrusion, the desired occlusal clearance was achieved, and impressions were recorded. For retention, the patient was given an upper clear vacuum retainer and the crown was placed on the implant.

The Evaluation of Clinical Signs and Symptoms of Malignant Tumors Involving the Maxillary Sinus: Recommendation of an Examination Sieve and Risk Alarm Score.

This observational study was conducted to evaluate the clinical signs and symptoms of maxillary sinus tumors and to propose a clinical examination sieve and a unique risk alarm score to be used for timely patient referral and vigilance. The study consisted of 70 patients between 20 to 82 years of age from both sexes. The clinical information gained was collected from the upper dentoalveolar segment, orbit, and nasal sites. Regarding the early clinical sign and symptoms of patients, nasal obstruction was found in 67 patients (95.7%), facial swelling in 69 patients (98.6%), paresthesia in 41 patients (58.6%), and epistaxis in 50 patients (71.4%). Furthermore, in terms of the late signs and symptoms, a palpable mass in buccal sulcus was observed in 65 (92.9%) of the patients, lymphadenopathy in 24 (34.3%), paresthesia in 38 (54.3%), and diplopia in 22 (31.4%). Furthermore, general sign and symptoms like exophthalmos was present in 35 patients (50%), anosmia was observed in 37 patients (52.9%), and oroantral fistula was noted in 37 patients (55.9%). Additionally, 67 (95.7%) of the patients complained of nasal obstruction. Similarly, facial asymmetry was observed in 69 (98.6%) of the patients and double vision was observed in 24 (34.4%). Tumors of the maxillary sinus have a very insidious course of spread and uncertain clinical signs and symptoms. What makes diagnosis worse is the fact that the symptoms of these tumors are so well hidden in the sponge-like nature of the midfacial region that they are easily misinterpreted by patients. Therefore, diagnoses must be made early, dentists must be vigilant, and patients must be fully investigated at the slightest suspicion of a tumor, albeit benign.